Re: [isp-wireless] non-pen "saddle" mount

[Tom <tom@...>]

In a pinch, I have modified an FRM-0125 to do this.  Cut through top 
parts of the base bracket and bend them down to match the roof slope.

Then drill a new hole in the mast so the supports get moved down and 
keep the proper angle.

Also a good idea to run a steel cable through your ballast blocks on 
both sides in case a block comes loose. You don't want it tumbling 
down the roof and damaging someone/thing.

Tom

At 01:29 PM 7/3/2008, you wrote:

> Hi all-
>
> I need a non-pen "saddle" mount, basically like your standard rohn 
> FRM-238, but with the brick trays sort of hinged, so that it could 
> straddle the peak of a roof.
>
> I see these on motels for the dish that (I think) hooks up to their 
> corp reservation system, but I'm having trouble finding them on the ninnernets.
>
> Thanks!
> Ryan



> To unsubscribe via postal mail, please contact us at:
> Jupitermedia Corp.
> Attn: Discussion List Management
> 475 Park Avenue South
> New York, NY 10016
>
> Please include the email address which you have been contacted with.
>
> Copyright 2007 Jupitermedia Corporation All Rights Reserved.





To unsubscribe via postal mail, please contact us at:
Jupitermedia Corp.
Attn: Discussion List Management
475 Park Avenue South
New York, NY 10016

Please include the email address which you have been contacted with.

Copyright 2007 Jupitermedia Corporation All Rights Reserved.