|
<- Previous Message | Next Message -> Thread Index [isp-wireless] Re: Proxim mp11a
Also make sure your Lightning protectors allow voltage up to 60V. 802.3af requires this. The Citel units support it. Tom DeReggi RapidDSL & Wireless, INC ---- Original Message ----- From: "Chris Burke" <arizonai@mywaywireless.com> To: <isp-wireless@isp-wireless.com> Sent: Friday, October 31, 2003 3:16 PM Subject: [isp-wireless] Re: Proxim mp11a > But 802.3af devices include some communication, if you will, between the > injector and the device. So only 802.3af devices will work together. For > instance, an 802.3af injector will not work with a cisco device. > > Chris Burke > > > > > -----Original Message----- > From: Tom DeReggi [mailto:wirelessnews@rapiddsl.net] > Sent: Friday, October 31, 2003 3:13 PM > To: isp-wireless@isp-wireless.com > Subject: [isp-wireless] Re: Proxim mp11a > > The 802.3af doesn't specify which polatiry or which of the two extra pair > needs to be used for power. The af standard is supposed to have the > Hardware auto adjust to which type of POE is used or at minimum not get > blown out if plugged in the wrong way. But in my experience most of the gear > does not do this correctly. So make sure your POE uses the pair specified > by the MP11a. The two pairs used for Ethernet are standard and constant, > so its easy to figure it out on the other two remaining. > > Tom DeReggi > RapidDSL & Wireless, INC > > ----- Original Message ----- > From: "Travis Johnson" <tlj@ida.net> > To: <isp-wireless@isp-wireless.com> > Sent: Friday, October 31, 2003 2:56 PM > Subject: [isp-wireless] Proxim mp11a > > > > Hi, > > > > Just got a set of Proxim Tsunami MP11.a BSU and SU to test. I am trying > > to use a standard 802.3af power injector to do power over ethernet with > > these units, but they won't power up. The injector tests good, and works > > with other PoE equipment. Proxim's tech support said "We don't know". > > > > Any ideas? > > > > Travis > > Microserv > > > > > > > > > > ___________ > ___________ > > > > ___________ > ___________ > > > <- Previous Message | Next Message -> Thread Index |
|
|