Do you recommend running CEF on an RBE interface for adsl use?

Jim


----- Original Message -----
From: "Chris Kissinger" <chris@...
To: <isp-dsl@isp-dsl.com>
Sent: Wednesday, February 20, 2002 11:12 AM
Subject: RE: Bridge1483 on Cisco 3640


http://www.cisco.com/warp/public/794/7200_bdaggreg.html

It's for a 7200 but it's pretty much the exact same configs.

As far as IOS 12.2 will give you more options for RBE, dhcp unnumbered,
etc.

If you want those in 12.1 you'll need to jump over to a 12.1T variation.
Personally we had some router crash issues with 12.1(5)T<6 through 10>
and it's cleared up with 12.2.7

Memory will depend on what the IOS requires (32mb for 12.2.7) and how
much routing you're going to be doing out of that router. If you're just
doing DSL aggregation 32 or 64 should be sufficient. If you need to do
anything with BGP tables it's easiest to just get 128 and not worry
about it.

Chris

-----Original Message-----
From: JunoGuy [mailto:junoguy@...Sent: Tuesday, February 19, 2002 2:12 PM
To: isp-dsl@isp-dsl.com
Subject: Bridge1483 on Cisco 3640


Can someone tell me or email me a sample config doing bridge1483 on a
Cisco 3640?  I also need to know what is a good stable code for this
type of setup  and how much memory you recommend.


Thanks!

J
--

Replies

RE: Bridge1483 on Cisco 3640, Chris Kissinger