Re: [isp-bgp] fast backup for BGP

[Brian Fisk <fiskit@...>]

I am about to order equipment for my ISP and I will have 2 providers. 
You guys say 7206 is working for you, how would a 3750, or 3550, or
7505 work in the same scenario?  All of our transport to our isp's and
our clients is ethernet.  One of our isp's will be primary, the other
secondary (100mbits on the pri, 20mbits on the sec).  I don't need to
do full table bgp, just enough to make sure my systems are up.  Can
anyone help with hardware recommendations?

Brian

On Apr 1, 2005 5:36 PM, Darrell Hyde <DHyde@...> wrote:
> I'm actually doing the same thing. I have 2 7206 VXR's, each with its own Internet transit links, and a direct connection between them. They each peer BGP with their providers and with each other. This way I can take advantage of all of my providers no matter which router is the active member. The hiccup you're seeing might be because you have your timers set too high. I have mine set to 5 second intervals with a 15 second holdtime and my transitions are always quite smooth (while pushing 100 or so mb/s to the net no less). Setting each member to preempt is also key to having smooth transitions. We've even taken the fire problem into account as well (well sorta) by putting our routers at physically diverse points in our datacenter. This has at times made wiring and troubleshooting cumbersome however.
> 
> D.
> 
> > -----Original Message-----
> > From: Jacob [mailto:jacob@...]
> > Sent: Friday, April 01, 2005 4:56 PM
> > To: isp-bgp@isp-bgp.com
> > Subject: RE: [isp-bgp] fast backup for BGP
> >
> > HSRP?
> >
> > I have BGP and HSRP running on 2 7206s.  If one router
> > crashes, the other
> > one takes over.  But, there is about a 2 to 3 second hiccup
> > until the HSRP
> > moves from standby to active.
> >
> > Now, if one does catch on "fire", the other router could
> > suffer since it is
> > right next to it... ;-)
> >
> > -----Original Message-----
> > From: &Igr;&ohgr;&aacgr;&ngr;&ngr;&eegr;&sfgr; &Ogr;&igr;&kgr;&ogr;&ngr;&ogr;&mgr;&ogr;&ugr; [mailto:oikonomou@...]
> > Sent: Tuesday, March 29, 2005 6:55 AM
> > To: isp-bgp@isp-bgp.com
> > Subject: [isp-bgp] fast backup for BGP
> >
> > Hi all,
> >
> > I am having 2 cisco7200 and running BGP on the first one.  I
> > am wondering if
> > there is an easy way to set them up so in case the first one
> > is set on fire
> > the rest of my network will keep its connectivity.
> >
> > Thank you
> >
> > John
> >
> >
> > _______________

> >  ______________



> > To unsubscribe via postal mail, please contact us at:
> > Jupitermedia Corp.
> > Attn: Discussion List Management
> > 475 Park Avenue South
> > New York, NY 10016
> >
> > Please include the email address which you have been contacted with.
> >
> > Copyright 2005 Jupitermedia Corporation All Rights Reserved.
> >
> >




> > To unsubscribe via postal mail, please contact us at:
> > Jupitermedia Corp.
> > Attn: Discussion List Management
> > 475 Park Avenue South
> > New York, NY 10016
> >
> > Please include the email address which you have been contacted with.
> >
> > Copyright 2005 Jupitermedia Corporation All Rights Reserved.
> >
> 




> To unsubscribe via postal mail, please contact us at:
> Jupitermedia Corp.
> Attn: Discussion List Management
> 475 Park Avenue South
> New York, NY 10016
> 
> Please include the email address which you have been contacted with.
> 
> Copyright 2005 Jupitermedia Corporation All Rights Reserved.
> 



-- 
Brian Fisk
President
Fisk Internet Services, LLC
brian@...
814-689-2059
http://www.fiskis.com/





To unsubscribe via postal mail, please contact us at:
Jupitermedia Corp.
Attn: Discussion List Management
475 Park Avenue South
New York, NY 10016

Please include the email address which you have been contacted with.

Copyright 2005 Jupitermedia Corporation All Rights Reserved.